一，Product Description
CM Seawater Desalination RO membranes Series RO membranes are designed for seawater desalination, featured with high rejection and high productivity. CM Seawater Desalination RO membranes Series are ideal for seawater desalination in shipboard applications, water makers, land-based and sea-based desalinators.
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99.5% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-SW-2521 | 200(0.76) | 12(1.1) | 99.5 | 32800 | 800(5.5) | 8 |
CM-SW-2540 | 500(1.89) | 28(2.6) | 99.5 | 15 | ||
CM-SW-4021 | 750(2.8) | 33(3.1) | 99.7 | 8 | ||
CM-SW-4040 | 1400(5.3) | 85(7.9) | 99.7 | 8 | ||
CM-SW-8040 | 6000(22.7) | 380(35.2) | 99.8 | 8 |
Note: Performance specifications based on 32800ppm NaCl feed water, 800psi(5.5MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
一，Product Description
CM Seawater Desalination RO membranes Series RO membranes are designed for seawater desalination, featured with high rejection and high productivity. CM Seawater Desalination RO membranes Series are ideal for seawater desalination in shipboard applications, water makers, land-based and sea-based desalinators.
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99.5% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-SW-2521 | 200(0.76) | 12(1.1) | 99.5 | 32800 | 800(5.5) | 8 |
CM-SW-2540 | 500(1.89) | 28(2.6) | 99.5 | 15 | ||
CM-SW-4021 | 750(2.8) | 33(3.1) | 99.7 | 8 | ||
CM-SW-4040 | 1400(5.3) | 85(7.9) | 99.7 | 8 | ||
CM-SW-8040 | 6000(22.7) | 380(35.2) | 99.8 | 8 |
Note: Performance specifications based on 32800ppm NaCl feed water, 800psi(5.5MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
