一，Product Description
CM Fouling Resistant Reverse Osmosis Membranes are designed for treatment of various industrial water applications, such as recycling of industrial reclaimed water, industrial wastewater, municipal sewage, other slightly contaminated water and organic polluted water.
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99.5% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-FR-4040 | 2500(9.5) | 78(7.2) | 99.5 | 2000 | 225(1.55) | 15 |
CM-FR-8040 | 10500(40) | 365(34) |
Note: Performance specifications based on 2000ppm NaCl feed water, 225psi(1.55MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
一，Product Description
CM Fouling Resistant Reverse Osmosis Membranes are designed for treatment of various industrial water applications, such as recycling of industrial reclaimed water, industrial wastewater, municipal sewage, other slightly contaminated water and organic polluted water.
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99.5% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-FR-4040 | 2500(9.5) | 78(7.2) | 99.5 | 2000 | 225(1.55) | 15 |
CM-FR-8040 | 10500(40) | 365(34) |
Note: Performance specifications based on 2000ppm NaCl feed water, 225psi(1.55MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
