一，Product Description
CM Nanofiltration Membrane elements are manufactured using the industry’s leading membrane film technology. These membranes are available in all standard sizes, and shipped dry for easier storage and handling. 100% vacuum integrity testing and 5-10% wet testing are provided.
二 , Advantage
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane technology and manufacturing processes.
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | Appiled Pressure Psi（Mpa） | Racovery Rate(%) |
CM-NF-2521 | 300(1.1) | 14(1.3) | 30-50(NaCl) 85-95(MgSO4) | 70(0.5) | 8 |
CM-NF-2540 | 700(2.64) | 27(2.5) | 15 | ||
CM-NF-4021 | 900(3.4) | 36(3.4) | 8 | ||
CM-NF-4040 | 2000(7.6) | 78(7.2) | 15 | ||
CM-NF-8040 | 12000(45.5) | 400(37.2) | 40-60(NaCl) >96(MgSO4) | 100(0.69) | 15 |
Note: Performance specifications based on feed water solution concentration(ppm) listed in the table above, 30psi(0.2MPa) applied pressure for 1812 and 2012, and 70psi(0.5MPa) applied pressure for 4040 and 8040, 25°C(77°F), feed water PH 7-8 and 15% recovery. Single element permeate flow may vary ±20%.
一，Product Description
CM Nanofiltration Membrane elements are manufactured using the industry’s leading membrane film technology. These membranes are available in all standard sizes, and shipped dry for easier storage and handling. 100% vacuum integrity testing and 5-10% wet testing are provided.
二 , Advantage
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane technology and manufacturing processes.
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | Appiled Pressure Psi（Mpa） | Racovery Rate(%) |
CM-NF-2521 | 300(1.1) | 14(1.3) | 30-50(NaCl) 85-95(MgSO4) | 70(0.5) | 8 |
CM-NF-2540 | 700(2.64) | 27(2.5) | 15 | ||
CM-NF-4021 | 900(3.4) | 36(3.4) | 8 | ||
CM-NF-4040 | 2000(7.6) | 78(7.2) | 15 | ||
CM-NF-8040 | 12000(45.5) | 400(37.2) | 40-60(NaCl) >96(MgSO4) | 100(0.69) | 15 |
Note: Performance specifications based on feed water solution concentration(ppm) listed in the table above, 30psi(0.2MPa) applied pressure for 1812 and 2012, and 70psi(0.5MPa) applied pressure for 4040 and 8040, 25°C(77°F), feed water PH 7-8 and 15% recovery. Single element permeate flow may vary ±20%.
