loading
CM-UF-219
CM
| Availability: | |
|---|---|
| Quantity: | |
Capillary Ultra filtration Module UF-PES-219(55)
| Performance (for most feed waters) | |
| Filtrate Flow | 3-6 ㎥/ｈ |
| Filtrate Turbidity | ≤0.1NTU |
| Filtrate SDI15 | ≤3 |
| Bacteria removal | ≥6log |
| Type Configuration：Capillary Ultra filtration Module | |
| Membrane Polymer | PES/PVP |
| Nominal Membrane Area | 55 ㎡ |
| Nominal pore size | 0.02μm |
| Fiber Dimensions | ID 0.8mm |
| Diameter of cylinder part | 219 mm |
| Application Date（for General use） | |
| Typical Filtrate Flux Range | 60-120L/㎡/ｈ |
| Maximum Applied Feed Pressure | 0.5Mpa |
| Maximum Tran membrane Pressure | 0.3Mpa |
| Maximum Backwash Pressure | 0.3Mpa |
| Operating Temperature Range | 5-40℃ |
| pH Operating Range | 2-12 |
| Operating Module | Inside to Outside Filtration |
| Typical Process Conditions | |
| Backwash Flux | 250-300 L/㎡/ｈ |
| Backwash Duration | 30-60 seconds |
| Back Frequency | 20-60 minutes |
| Cleaning chemical resistance | |
| Sodium Hypochlorite | Typical 200 ppm, Maximum 500ppm |
| 250000ppm hours cumulative | |
Capillary Ultra filtration Module UF-PES-219(55)
| Performance (for most feed waters) | |
| Filtrate Flow | 3-6 ㎥/ｈ |
| Filtrate Turbidity | ≤0.1NTU |
| Filtrate SDI15 | ≤3 |
| Bacteria removal | ≥6log |
| Type Configuration：Capillary Ultra filtration Module | |
| Membrane Polymer | PES/PVP |
| Nominal Membrane Area | 55 ㎡ |
| Nominal pore size | 0.02μm |
| Fiber Dimensions | ID 0.8mm |
| Diameter of cylinder part | 219 mm |
| Application Date（for General use） | |
| Typical Filtrate Flux Range | 60-120L/㎡/ｈ |
| Maximum Applied Feed Pressure | 0.5Mpa |
| Maximum Tran membrane Pressure | 0.3Mpa |
| Maximum Backwash Pressure | 0.3Mpa |
| Operating Temperature Range | 5-40℃ |
| pH Operating Range | 2-12 |
| Operating Module | Inside to Outside Filtration |
| Typical Process Conditions | |
| Backwash Flux | 250-300 L/㎡/ｈ |
| Backwash Duration | 30-60 seconds |
| Back Frequency | 20-60 minutes |
| Cleaning chemical resistance | |
| Sodium Hypochlorite | Typical 200 ppm, Maximum 500ppm |
| 250000ppm hours cumulative | |
