一，Product Description
CM Ultra Low Pressure RO membranes are designed to provide high quality product water at relatively low operating pressure of standard 150psi. Ultra Low Pressure RO membranes provide excellent performance and lower energy consumption when compared to the standard high rejection membranes. Ultra Low Pressure RO membranes are recommended to be used for light brackish water, such as pure water, boiler water, food processing, beverage, pharmaceutical production, etc
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes.
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-ULP-2514 | 220(0.8) | 8(0.7) | 99 | 1500 | 150(1.03) | 5 |
CM-ULP-2521 | 370(1.4) | 13(1.2) | 99 | 8 | ||
CM-ULP-2540 | 800(3.0) | 28(2.6) | 99 | 15 | ||
CM-ULP-4014 | 750(2.9) | 22(2.0) | 99.3 | 15 | ||
CM-ULP-4021 | 1000(3.8) | 36(3.3) | 99.3 | 15 | ||
CM-ULP-4040 | 2500(9.5) | 78(7.2) | 99.5 | 15 | ||
CM-ULP-8040 | 10500(40) | 365(34) | 99.5 | 15 |
Note: Performance specifications based on 1500ppm NaCl feed water, 150psi(1.03MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
一，Product Description
CM Ultra Low Pressure RO membranes are designed to provide high quality product water at relatively low operating pressure of standard 150psi. Ultra Low Pressure RO membranes provide excellent performance and lower energy consumption when compared to the standard high rejection membranes. Ultra Low Pressure RO membranes are recommended to be used for light brackish water, such as pure water, boiler water, food processing, beverage, pharmaceutical production, etc
二，Characteristics
CM RO Membranes are available in customized sizes as well as standard sizes. All the elements are shipped in dry condition for ease of storage and handling.
Advantage
☞ Up to 99% of total dissolved solids removed.
☞ 100% vacuum tested.
☞ Superior quality and consistent performance.
☞ Cost savings.
☞ Standard sizes to fit in commonly available housings.
☞ Using the most advanced membrane film technology and manufacturing processes.
三，
Model No. | Average Permeate Flow Rate GPD(T) | Active Membrane Area ft²(m²) | Nominal Salt Rejection(%) | NaCl (ppm) | Appiled Pressure Psi（Mpa） | Recovery Rate(%) |
CM-ULP-2514 | 220(0.8) | 8(0.7) | 99 | 1500 | 150(1.03) | 5 |
CM-ULP-2521 | 370(1.4) | 13(1.2) | 99 | 8 | ||
CM-ULP-2540 | 800(3.0) | 28(2.6) | 99 | 15 | ||
CM-ULP-4014 | 750(2.9) | 22(2.0) | 99.3 | 15 | ||
CM-ULP-4021 | 1000(3.8) | 36(3.3) | 99.3 | 15 | ||
CM-ULP-4040 | 2500(9.5) | 78(7.2) | 99.5 | 15 | ||
CM-ULP-8040 | 10500(40) | 365(34) | 99.5 | 15 |
Note: Performance specifications based on 1500ppm NaCl feed water, 150psi(1.03MPa) applied pressure, 25°C(77°F), feed water PH 7-8 and recovery listed in the table above. Single element permeate flow may vary ±20%.
